Panasonic PT-60LCX64B Operating Instructions Manual page 53

Adjustment Button
item
H Position Press ► button. The image moves to the right.
Press ◄ button. The image moves to the left.
V Position Press ► button. The image moves up.
Press ◄ button. The image moves down.
H Width Press OK
button.
Press ► button. Press to enlarge image vertically
V Size
Press ◄ button. Press to shrink image ver ti cal ly
Press ► button. Press to enlarge image horizontally
H Size
Press ◄ button. Press to shrink image horizontally
Press ► button.
Phase
Press ◄ button.
Color Corr. Press OK
button.
The OVER SCAN menu is added only when a 640 X 480 signal is input from the HDMI Input.
Adjustment Button
item
Overscan Press OK
button.
Adjusting screen position and size
Adjustment Details
If noise appears on the ends of the
image in Shrink, switch to Enlarge.
If noise appears on the ends of the
image in Widen, switch to Nar row.
Adjust in order to remove any picture interference or contour blurring
which may occur in computer images.
With HDMI connection, depending on the signal, the picture may be
displayed with unnatural colors (as if red and blue are reversed).
Correct by setting the Color Corr. to Off. (Default is On.)
ASPECT Overscan: ON
(Normal display.)
4:3 mode
(Widen)
FULL mode
(En large)
(Shrink)
(Widen) (Narrow)
Overscan: OFF
(Picture is displayed smaller so it will
fi t on the screen.)
(Narrow)
Note
Only JUST mode
Only 4:3 mode
(Except PC
input)
Only ZOOM
mode
RGB input
RGB input
HDMI input
53