Advertisement
EP3 Series Installation Guide
Wiring
Current/voltage Control, Voltage Output Example
AIR COMPRESSOR
20-45psi
Regulator
AIR COMPRESSOR
Z203959-0H
Page 3 of 5
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TRAP/
FILTER
BRANCH
0-10V PROCESS METER
Digital Input
(Contact Closure)
Analog (Out 9-20mA)
Common
+
-
POWER
SOURCE
Input switch set to voltage (0-5VDC or 0-10VDC)
•
• Input volt jumper set to either 0-5VDC or 0-10VDC
• Input switch set to 4-20mA
• Output jumper set to 0-10VDC
PWM Control Example
TRAP/
FILTER
20-45psi
BRANCH
Regulator
PWM CONTACT
-
• Input switch set to "PWM"
+
• Tri-State jumper set to "ON"
POWER
SOURCE
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
AIR COMPRESSOR
+
-
AIR COMPRESSOR
Current/voltage Control, Current Output Example
TRAP/
FILTER
20-45psi
Regulator
• Input switch settings same as example 1
POWER
• Output jumper set to 4-20mA
SOURCE
Tri-state Control Example
TRAP/
FILTER
20-45psi
Regulator
TRI-STATE CONTACTS
CH2
CH1
OR
OR
-
-
• Input switch set to "TRI-STATE"
+
+
POWER
• Tri-State jumper set to "ON"
SOURCE
BRANCH
4-20mA PROCESS METER
+
-
Digital Input
(Contact Closure)
Analog Out
(0-5/0-10/4-20mA)
Common
BRANCH
0820
Advertisement
