Eizo DuraVision FDF2711W-IP Setup Manual page 21

6.
Set each item and select "OK".
Item
*1
Camera Name
IP Address
"Ping" button
Port
SSL *5
Certificate Validation
Protocol
*6
Username
*6
Password
*7
Media Profile
*7
Transmission Mode
*8
URI
Comm. Method
*10
Stream
*10
Channel
RS485PTZ Control *10
Video Stream *11
Stream Profile *11
Detail
Enter the camera name. If "Obtain Camera Name" is
selected, the camera name is automatically obtained
from the network camera. *2
• If "Protocol" is "DirectUri," "Obtain Camera Name"
cannot be used.
Enter the IP address of the network camera.
Executes a connection test with the camera (i.e. ping
command).
Enter the port number of the network camera.
Provides secure communication.
Select certificate validation during SSL communication.
Attention
• If "Certificate Validation" is "On," the Root Certificate
of the network camera must be registered in "Root
Certificate" of "Certificate".
Select the protocol to control cameras.
Enter the user name to be used to access the network
camera.
Enter the password to be used to access the network
camera.
Select the media profile of the network camera.
If "Obtain Profile" is selected, the profile is
automatically obtained from the network camera.
Select the mode for transmitting camera images.
Set the URI that starts with rtsp:// or rtp://.
Select the communication method for camera video
images.
Select a stream format.
Select a stream channel.
Select whether or not PTZ operation is enabled for the
camera that supports RS 485 communication.
Select a video stream format.
Select a stream profile.
Setting range
*3
Alphanumeric, kana ,
*3
kanji (Up to 24
characters)
0.0.0.0 to
255.255.255.255
1 to 65535 *4
On / Off
Panasonic / AXIS /
ONVIF / DirectUri
Alphanumerics and
symbols (Up to 32
characters)
Alphanumerics and
symbols (Up to 32
characters)
EIZO_Profile / Profile of
each camera
Unicast / Multicast
Alphanumerics (Up to
1023 characters)
*9
RTP over UDP / RTP
over RTSP
1 / 2 / 3 / 4
1 / 2 / 3 / 4
On / Off
Depends on the camera
Depends on the camera
21
Setup