Eizo DuraVision FDF2711W-IP Setup Manual page 11

Names
1. Remote control light
reception section
2. Reset button
3. VOLUME- / VOLUME+
buttons
4. BRIGHT- / BRIGHT+
buttons
5. button
6. Power indicator
7. Speakers
*2
8. Stand
9. Security lock slot
10. Main power switch
11. Power connector
12. LAN port
13. USB downstream port
14. HDMI connector (output)
15. Stereo mini jack
*1 Will be supported with updated software.
*2 The stand of this product can be replaced by an optional arm (or optional stand). For details on how to
replace the stand, refer to "Installation of Optional Arm" (page 24).
*3 Other USB devices cannot be connected.
Receives signals from the remote control. (A function for use with models
equipped with a remote control)
Pressing and holding this button for 10 seconds will initialize the following
information:
• Camera information
• USB lock
• User account setting
*1
Cannot be used.
Adjusts the brightness of the monitor screen. By pressing and holding the
button, you can quickly change the brightness.
Turns the power on or off.
Displays the operating status of the monitor.
Blue The screen is displayed.
Flashing blue The system is starting up.
Red Power off
OFF Main power off
*1
Cannot be used.
Adjusts the viewing angle.
Note
• While the monitor can be rotated vertically, the live image screen menu
will not be rotated.
Supports Kensington MicroSaver security system.
Turns the main power on or off.
|: On ○: Off
Connects the power cord.
Connects the network cable.
a) Status LED
a b
b) Link LED
Connects a USB mouse or USB keyboard.
Connects to an additional monitor that supports HDMI.
Cannot be used. *1
Details
OFF Not used
Flashing
Transmitting data
green
OFF No data transmission
*3
Controls and Functions
11