Table of Contents
Advertisement
Quick Links
Dual Roller FlexShade
Heavy-duty, clutch-operated window shade
Overview - Components
(Large Hardware Shown)
I D L E
E N D
C A P
C O V
E R
PLEASE READ - Important Installation Information
Caution:
1. Inspect all boxes to make sure you have
received the proper shades and parts.
Controls may be shipped separately, or in
same carton as shades.
2. Open cartons lengthwise, taking care not
to cut into cardboard shipping container.
Contents
Overview - Components
(Large Hardware Shown)
PLEASE READ - Important Installation Information ................................................1
PLEASE READ - Safety Information ............................................................................2
PLEASE READ - Field Adjustments, Cleaning and Maintenance ..........................2
Section 1 - Mounting Endcaps ....................................................................................3
Section 2 - Pocket Headbox Installation ...................................................................4
Section 3 - Dual Roller Ceiling/Wall Headbox ..........................................................5
NEXD
®
R E N
D C A
P
3. Before mounting shades, verify measurements
on label provided with shade, and ensure unit
is installed at correct width.
4. All endcaps, fascia, headboxes, and other
hardware must be installed level. Shades
must be level and square.
..........................................................1
INSTALLATION & OPERATION
E N D
C O V
C L U
T C H
E N D
C A P
B e a
d
C h a
i n s
P - C
l i p s
S p r
i n g -
C h a
L o a
i n T
d e d
D e v
e n s
i c e s
i o n
( o p t
i o a l )
Read and understand all warnings before
6. Read the following installation guidelines
thoroughly and follow them carefully.
Failure to do so may cause product to fall or
otherwise fail, and invalidates warranty.
7. Installer is responsible for selecting mounting
hardware appropriate for site conditions.
Section 4 - Shade Fabric Roller Mounting ...............................................................6
Section 6 - Safety Brackets .........................................................................................7
Section 7 - Attaching Fascia .......................................................................................8
Section 8 - Bead Chain Limits and Safety Device Installation ..............................8
Section 9 - Dimensions: Small Hardware .................................................................9
Section 10 - Dimensions: Large Hardware .............................................................10
If you have any difficulties installing or servicing your
FlexShade
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved
INSTRUCTIONS
C A P
E R
TOOLS REQUIRED
LEVEL
PENCIL
POWER DRILL
HARDWARE
TAPE MEASURE
PLIERS
SCREWDRIVER
HEX WRENCH
CAUTION
beginning installation.
.................................................................7
NEXD, call your dealer or Draper, Inc.
®
|
FORM: FS_NEXD_Dual_Roller_Inst20
(by others)
Advertisement
Table of Contents
Related Manuals for Draper Dual Roller FlexShade NEXD
Summary of Contents for Draper Dual Roller FlexShade NEXD
-
Page 1: Table Of Contents
If you have any difficulties installing or servicing your FlexShade NEXD, call your dealer or Draper, Inc. ® Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: FS_NEXD_Dual_Roller_Inst20 © 2020 All Rights Reserved... -
Page 2: Please Read - Safety Information
Most standard Draper fabrics may be cleaned at the window by vacuuming with a soft brush If the shade is telescoping, place a piece of high attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy quality gaffer tape about 1"... -
Page 3: Section 1 - Mounting Endcaps
Dual Roller FlexShade NEXD ® page 3 of 10 Section 1 - Mounting Endcaps Please Note: If installing Pocket Headbox or Surface Headbox, please install headbox FIRST (Section ????) Caution: Before mounting shades, verify measurements on label provided with shade, and ensure unit is installed at correct width. Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions. -
Page 4: Section 2 - Pocket Headbox Installation
Dual Roller FlexShade NEXD ® page 4 of 10 Section 2 - Pocket Headbox Installation Figure 3-A PLEASE NOTE: Installer must provide adequate clearance for removal of Roller Assembly during installation and maintenance. PLEASE NOTE: Headbox must be mounted directly to ceiling, or to a continuous blocking that is secured to building structure. -
Page 5: Section 3 - Dual Roller Ceiling/Wall Headbox
Dual Roller FlexShade NEXD ® page 5 of 10 Section 3 - Dual Roller Ceiling/Wall Headbox Figure 4-A Figure 4-B Place endcaps into top/back cover piece of ceiling/wall headbox. Drill holes in back or top (wall mount) of top/ (ceiling mount) back cover piece. -
Page 6: Section 4 - Shade Fabric Roller Mounting
Caution: Do not allow shade roller to become exposed by lowering shade fabric too far. Please Note: If shade fabric is tracking to one side, see Be sure to use stop balls provided by Draper to set up and down travel limits. Stop balls "Field Adjustments,"... -
Page 7: Section 5 - Spring Assist Option (Idler End)
Dual Roller FlexShade NEXD ® page 7 of 10 Section 5 - Spring Assist Option (Idler End) Caution: The retaining clip must be installed around the idler-end shaft as shown to prevent the roller assembly from moving left or right during operation, and to ensure that the spring-loaded shaft does not Figure 6-A retract into the mechanism in case of a bearing failure. -
Page 8: Section 7 - Attaching Fascia
Figure 9-A Figure 9-B Spring-Loaded Cord Tension Device If Draper Clutch FlexShade complies with WMCA/ANSI Standard A100.1-2018, a Spring-Loaded Cord Tension Device Chain Tension Device comes installed on bead chain . An approved permanent warning label and approved mechanical fasteners (Fig. -
Page 9: Section 9 - Dimensions: Small Hardware
Dual Roller FlexShade NEXD ® page 9 of 10 Section 9 - Dimensions: Small Hardware Small Staggered Dual Fascia Small Staggered Dual Fascia with Top-Back Cover " " (22mm) (22mm) " " (67mm) (67mm) 3 " 3 " (87mm) (87mm) 5 "... -
Page 10: Section 10 - Dimensions: Large Hardware
Dual Roller FlexShade NEXD ® page 10 of 10 Section 10 - Dimensions: Large Hardware Large Staggered Dual Fascia Large Staggered Dual Fascia with Top-Back Cover 7 " 7 " (200mm) (200mm) 7 " " (200mm) (202mm) 2 " 2 " (57mm) (57mm) MAX.
Need help?
Do you have a question about the Dual Roller FlexShade NEXD and is the answer not in the manual?
Questions and answers