Silvercrest SHM 600 A1 Operating Instructions Manual page 75

Handheld scanner
Hide thumbs Also See for SHM 600 A1:
Table of Contents

Advertisement

Available languages

Available languages

Perform calibration
NOTICE
Perform a calibration only if the white balance needs to be
reset. A white balance is recommended if it should be that
the lightest point in scanned images, which in reality should
be white, in fact appears in a shade of grey.
GB
Place the appliance on the paper supplied for white balance cali-
bration then switch the appliance on with the button /SCAN
Press and hold the button C/BW
/SCAN
the indicator for the SD card
memory is deleted. Subsequently, the LED SCAN
LED ERR
NOTICE
The documents/pictures extant on the Micro-SD memory card
will be retained even after the deletion of the internal memory.
Do not move the appliance until the LED ERR
The LED SCAN
Now begin to scan the paper by moving the appliance over
the white paper until the LED SCAN
appliance backwards if necessary).
The calibration process is fi nished. Switch the appliance off with
the button /SCAN
72
to switch into calibration mode. In the display
glow.
continues to glow.
.
Handling and operation
and then press the button
will blink until the internal
extinguishes (push the
.
and the
extinguishes.
SHM 600 A1

Advertisement

Table of Contents
loading

Table of Contents