Silvercrest SHM 600 A1 Operating Instructions Manual page 72

Handling and operation
Handling and operation
In this chapter you receive important information in regard to the
handling and operation of the appliance.
Insertion/exchange of the Micro-SD memory card
The appliance requires a Micro SD memory card (supplied) to be
able to scan and save documents or pictures.
♦ Switch the appliance off with the button /SCAN
♦ Insert the Micro SD memory card with the metal contacts facing
upwards into the slot
clicks into place.
IMPORTANT
► Do not press the Micro-SD memory card into the slot with force.
The appliance and the memory card could be damaged.
Formatting the Micro SD memory card
When using a new Micro SD memory card, this must be formatted
prior to scanning.
NOTICE
► Formatting erases all data saved on the Micro-SD memory card.
♦ Switch the appliance off with the button /SCAN
♦ Insert the Micro SD memory card with the metal contacts facing
upwards into the slot
clicks into place.
♦ Switch the appliance on with the button /SCAN
♦ Using a blunt and thin object, such as the end of a paper clip,
press the button FORMAT
♦ Press the button /SCAN
memory card. In the display
will blink until formatting is complete.
SHM 600 A1
and carefully press the card until it
and carefully press the card until it
. In the display
to start formatting the Micro-SD
the indicator for the SD card
.
.
.
appears a .
69
GB