Pride Mobility Litestream XF LTD Manual page 19

I V . C O M F O R T A D J U S T M E N T S
Armrest Removal
The armrests can be removed to aid in transfers or
transporting your wheelchair.
To remove the armrest:
1. Squeeze the release lever. See figure 29.
2. Pull the armrest up.
3. Repeat for the other side if necessary.
WARNING! Use care when operating.
Possible pinch point created during
operation.
Armrest Height Adjustment
You can adjust the armrest height to seven positions in
2.54-cm (1-in.) increments.
To adjust the armrest:
1. Rotate the latch located on the armrest. See figure 30.
2. Move the armrest up or down to the desired height.
3. Release the latch.
4. Make sure the armrest locks into place.
5. Repeat for the other side if necessary.
Dual-post Armrests
The dual-post armrests can be adjusted to aid in
transfers or transporting your wheelchair.
To flip the dual-post armrest back:
1. Pull back the armrest latch located on the armrest.
See figure 31.
2. Flip the armrest back.
3. Repeat the procedure for the other side if
necessary.
To adjust the dual-post armrest height:
1. Pull back the release lever that is located on the
armrest in either direction. See figure 32.
2. Move the armrest up or down to the desired
height.
3. The release lever is spring-loaded and will
automatically release.
4. Make sure the armrest latches into place.
5. Repeat the procedure for the other side if
necessary.
26
Figure 30. Single-post Armrest Height Adjustment
Figure 31. Dual-post Armrest Removal
Figure 32. Dual-post Armrest Height Adjustment
www.pridemobility.com
LATCH
LATCH
RELEASE LEVER
Litestream XF LTD