Pride Mobility Litestream XF LTD Manual page 15

I V . C O M F O R T A D J U S T M E N T S
Swing-Away Footrest (SFR) Removal
The Swing-away Footrests (SFR) can be moved or
removed to aid in transfers or transporting your wheel-
chair.
To move the SFR to the side:
1. Push the release lever back. See figure 17.
2. Move the SFR aside.
3. Repeat for the other side if necessary.
To remove the SFR:
1. Ensure the SFR is facing forward and not swung to
the side.
2. Push the release lever back.
3. Pull the SFR up. See figure 18.
4. Repeat for the other side if necessary.
Figure 17. SFR Release
Swing-Away Footrest (SFR) Foot Plate Length
You can change the SFR foot plate length between 26-
33 cm (10.25-13 in.) in 1.91-cm (0.75-in.) increments.
This length is measured from the SFR foot plate to the
top of the SFR.
To change the SFR foot plate length:
1. Remove the screws from the SFR. See figure 19.
2. Adjust the foot plate to the desired length.
3. Reinstall the screws into the SFR.
4. Repeat for the other side.
Elevating Leg Rest (ELR) Foot Plate Length
You can change the ELR foot plate length between
33.66-55.88 cm (13.25-22 in.). This length is measured
from the ELR foot plate to the top of the ELR. See fig-
ure 20.
Figure 18. SFR Removal
To change the ELR foot plate length:
1. Loosen the screws on the back of the ELR.
2. Adjust the foot plate to the desired length.
3. Tighten the screws on the back of the ELR.
4. Repeat the procedure for the other side.
SCREWS
Figure 19. SFR Foot Plate Adjustment
22 www.pridemobility.com Litestream XF LTD