Table of Contents
Advertisement
A confirmation question will be displayed, select Yes to confirm deletion
4.
Note: In idle mode, press <Delete>. The base will announce, "To delete all old messages, press Delete",
press <Delete> again within 3 seconds to delete all old messages. You will hear, "All old messages
deleted."
12.9.
Save a number in the answer phone message list to your contacts
1. Select Menu, Answer Phone is displayed, press Select.
2. View Messages will be displayed, press Select. Press <up> or <calls> to highlight the number you want
to save and select Options.
3. Scroll down to highlight Save number and press Select.
4. You now have two options:
i. To save this as a new contact, highlight New contact and press Select. Highlight the type of number, then
press Select. Enter the contact name and select Save.
ii.
To add to an existing contact, highlight Add to contact and press Select. Scroll to highlight the entry
you want, and press Select. Highlight the number type where you want to save the number (Home,
Work or Mobile) and press Select.
12.10. Remote access
With remote access you can operate your answer machine from any touch-tone telephone, even if you
forget to turn on your answer machine before you go out. You need to set a remote access 4-digit PIN first
and then you will need to turn remote access on if you want to use this feature.
12.10.1.
Set the remote access PIN for the first time (in case Call Control PIN is not yet set)
1. Select Menu, Answer Phone is displayed, press Select.
2. Press <Calls> until Settings is highlighted, press Select.
3. Press <Calls> to highlight Remote access and press Select.
4. Read the message prompt, press <Calls> to read it all, then select Set PIN.
5. Enter a 4-digit PIN of your choice and select OK.
6. Enter the 4-digit PIN again to confirm and select OK. The display will show Access PIN saved.
12.10.2.
Change the remote access PIN
1. Repeat step 1 to 3 of Section 12.10.1.
2. Press <Calls> to highlight Change PIN and press Select. You will be reminded that the access
PIN is used for both remote access and call control.
3. Enter your old 4-digit PIN and select OK.
4.
Enter the new 4digit PIN, select OK, then enter the new PIN again and select OK. The display
will show New Access PIN saved.
12.10.3.
Turn remote access on or off
1. Repeat step 1 to 3 of Section 12.10.1.
2. On/Off is displayed, press Select.
3. Press <Left> or <Right> to display On or Off and select Save. Saved will be displayed.
12.10.4.
Operating you answer machine remotely
1. Dial your phone number.
2. When you hear your outgoing message, press
3. Follow the voice prompts as below:
1 To replay the current message
2 To play all messages
*
and enter your 4-digit remote access PIN.
Hide quick links:
Advertisement
Table of Contents
