Items Supplied And Device Overview - Beem SA4.5.1 Manual

EN
• Switch off the device and pull the mains plug out of the plug socket if an error occurs
during operation, when there is a power cut or before a thunderstorm.
• Never pull or carry the device by the mains cable. When you pull it out of the plug
socket, always pull on the mains plug and never the mains cable!
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures,
persistent moisture, wet conditions and impacts.
• Use only original spare parts from the manufacturer.

Items Supplied and Device Overview

NOTES
• Never remove the rating plate and any possible warnings!
• Keep the original packaging during the warranty period of the device so
that the device can be properly packaged up if it needs to be returned. The
packaging is specially designed for this device and it must be exactly repacked
(Picture A). The warranty claim shall lapse if any damage is caused during
transport.
1. Unpack the items supplied and check them for completeness and transport damage.
If the device, the mains plug or the mains cable does have damage, do not use the
device(!), but contact our customer service department.
2. Remove all packaging materials and any possible protective fi lms used for protection
during transportation.
Key
(See fold-out page for illustrations)
1 Teapot with lid
2 Steam outlet
3 Water reservoir lid
4 Water reservoir handles
5 Water reservoir
6 Thermostat regulator
7 Base with integrated mains cable
8 Feet
9 On / Off switch with operating lamp (at the foot of the base)
10 Control lamp
11 Discharge tap
12 Discharge tap lever
13 Lid handles
26