Page 1
PRECAUTIONS Please follow these precautions: To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electrical shock, do not open the unit. Refer to qualified personnel for service only. Do not use the unit continuously for more than 24 hours with camera auto focus on.
Contents Product Introduction ..........2 Parts Identification .............3 Making Adjustments...........3 Control Panel ..............7 Remote Control Instruction ........8 INSTALLING VISUALISER SOFTWARE ....9 USB PORT ..............10 USB Image Capture ..........10 Specification .............12 Product Introduction Thank you for purchasing the visualiser. This visualiser comes with a new design which is more simple, flexible, portable and with a high resolution.
and negative films. It can be connected to projector, PC and other multi-media equipments. The visualiser is not just a equipment in corporate environment but also a indispensable tool to academic, medical and scientific community. Parts Identification Making Adjustments On the visualiser, t here are six places can be adjusted. 1.
Page 4
base with one hand, carry the mechanical arm with another hand and adjust it up and down. The mechanical arm can be moved from almost any angle. 2. Adjust LED light The LED light can be rotated 90 degrees. (as blow illustration) 3.
Page 5
Hold the camera box and rotate it left and right. The camera box can be rotated 90 degrees. (as blow illustration) 4. Adjust Camera Head Hold the camera connector with one hand, rotate the camera box connector with another hand. The camera head can be rotated 90 degrees. (as blow...
Page 6
illustration) 5. Adjust Base Bracket Hole the vislualizer base with one hand, rotate the base bracket with another hand. The base bracket can be rotated 45 degrees. (as blow illustration) Notice: Do not rotate the parts emphatically when the rotation reached maximum.
Control Panel There are four touch buttons located on the top of visualiser base: · T : Enlarge image · : Reduce image · LED Light:Turn the LED light on/off · Power: Turn the visualiser on/off · Pilot Light: On normal operations a blue color will be lit, in standby mode the color of the light will be red.
Remote Control Instruction POWER (Control the visualiser On/Off) SAVE (Save captured images) RECALL (Multiple Screen Display) LAMP (Control the arm lights) ROTATE (Rotate the image) FREEZE (Freeze the image) NEG (Display film negatives) MIRROR (V-Reverse the image) XGA (Switch between XGA (1024 x 768) and SXGA (1280 x 1024) mode) TEXT (Switch between image/text mode) B&W (Switch between Color mode and Black &...
SPLIT (Image Split function) PROJECTOR POWER (No function) PROJECTOR INPUT (No function) EXIT (Exit selected function) TELE/ IDE (Increase and decrease magnification) FAR/NEAR (Focus near or far) AUTO (To auto adjust brightness, auto white balance and auto focus) CAM/PC1/PC2 (No function) S-VIDEO/VIDEO (No function) VOLUME+/- (No function) RED+/- (Increase or decrease the red hue)
USB PORT The USB port can be used to store still images from the visualiser in a computer. Connect the visualiser to your computer with the supplied USB cable. The visualiser software is available on the supplied CD-ROM. * Please pay attention to the following: Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above, Graphic card 64M, USB 2.0 port, Hard disk 40G or more, Monitor display resolution higher than XGA (1024*768).
Page 11
A. Static Images Snap Click “Capture”—>“Capture Frame”, input the file name in dialog box, or you can click icon on the toolbar, then input file name in dialog window. The image file is JPG format. B. Snap Video Stream Click “Capture”—> “Start Capture”, input the file name in dialog box, or click icon on the toolbar, then input the file name in dialog box.
Specification Pickup Device CMOS color sensor with 2.0 Mega Pixels Output Resolution XGA(1024x768), SXGA(1280x 1024) Zoom 4x optical, 10x digital Focus Auto/manual White Balance Auto/manual Camera Head Rotation Horizontally 180° Lens Rotation Vertically 180° Negative/positive conversion Black/white and color selection Image Split Image Title Image Freeze...
Page 13
Setup: 341x262x492mm Dimensions (mm) Folded:528x208x159mm Weight 1.6kg * Design and specifications are subject to change without notice.