Change Your Nbg6818 Operating Mode - ZyXEL Communications ARMOR G1 User Manual

Chapter 7 Tutorials

7.9 Change Your NBG6818 Operating Mode

The operating mode refers to how the NBG6818 is being used in the network. The NBG6818 has two
operating modes:
• Standard: This is the NBG6818's default mode. In this mode, the NBG6818 routes traffic between a
local network and another network such as the Internet.
• Bridge: Use this mode so the NBG6818 bridges traffic between clients on the same network.
Note: Features such as parental Control, UPnP, Port Forwarding are not available in Bridge
mode.
Click the Navigation Panel icon on the top-left corner ( ).From the Settings drop-down list, click
1
System, then click the Operating Mode tab. Select the operating mode and select APPLY to save your
changes. Changing the NBG6818's operating mode may take up to two minutes.
NBG6818 User's Guide
51