ZyXEL Communications ARMOR G1 User Manual page 132

Figure 78 Settings > System > Status (Bridge Mode)
The following table describes the labels in this screen.
Table 46 Settings > System > Status
LABEL
System
Model Name
Firmware Version
System Operation Mode
Enable IPv4 Firewall
Enable IPv6 Simple Security
System Uptime
WAN Information
Note: : This is not available if you are using bridge mode.
MAC Address
IP Address
IP Subnet Mask
Gateway
IPv6 Address
LAN Information
MAC Address
IP Address
IP Subnet Mask
Chapter 13 System
DESCRIPTION
This is the model name of your device.
This is the firmware version.
This is the device mode in which the NBG6818 is currently running. See
on page 137 for more information.
This shows if the IPv4 firewall is enabled on the NBG6818.
This shows if the IPv6 firewall is enabled on the NBG6818.
This is the total time the NBG6818 has been on.
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the NBG6818's WAN IP address.
This shows the NBG6818's WAN subnet mask.
This shows the WAN port's gateway IP address.
This shows the current IPv6 address of the NBG6818.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the NBG6818's LAN IP address.
This shows the NBG6818's LAN subnet mask.
NBG6818 User's Guide
132
Section 13.7