Remote Control Setup - Adcom GFR-700HD User Manual

Remote Control Setup

The GFR-700HD is a learning remote control that is
capable of storing and executing commands for all
remote controls in your home theater system. In this
way, you can eliminate the confusion of using mul-
tiple remotes.
This section is divided into two main parts:
Using Preprogrammed Commands
The first section is an overview of the preprogrammed
commands for each source:
• Main commands ................................... 39
• Video 1~3 commands ............................. 39
• Video 4 commands (GDV-850) ................... 40
• CD commands (GCD-750) ......................... 40
• Tuner commands .................................. 41
• Rm 2 commands ................................... 41
Note: Main commands are not programmable, except
for the four user macros (M1, M2, M3, and M4).
Programming Remote Commands
The second section includes instructions for pro-
gramming the remote for each source:
• Programming commands ......................... 39
• Deleting commands ............................... 40
• Deleting all commands for a
single component ................................. 41
• Deleting all commands for
all components .................................... 41
• Programming macro buttons .................... 41
• Deleting macro buttons .......................... 42
• Discrete remote control commands ............ 42
46 GFR-700HD Owner's Manual
Pressing a source button on the remote con-
trol not only selects the input associated
with that source...
...but it also remaps the remote control
buttons for that source.