Tv/Monitor Connections - Adcom GFR-700HD User Manual

TV/Monitor Connections

There are four ways to connect the GFR-700HD to a
TV, monitor, or other display device:
• Composite Video
• S-Video
• Component/Progressive Scan Video
• HDMI
Composite Video Connections
1 Using a video cable, connect the Monitor output
on the GFR-700HD to the video input on your dis-
play device.
S-Video Connections
1 For higher quality video, use an S-video cable to
connect the Monitor output on the GFR-700HD to
the S-video input on your display device.
Component
Video Out
������������
��
����
����
���
�� ������������������
������
� �
�� ��
�� ��
��������������
� �
��� �� ��
�����
� �
������
������� �� ��
����
� �
��� �� ��
��
�� ��
�� � �
�� �������������� �
22 GFR-700HD Owner's Manual
Video/
S-Video Out
��
�������
� �� ��
��
�������
��
��
�������
��
�������
����������
� � � �� ��
���
������� ��
� � ���������������
���������
���������� ���
���
�������
�����
���
��
�����������
�����
��������������
���
������� �� ��
�������
�� ������� �� ��
�� ������� �� �� ������� ��
�� ������� �� ��
����� �����
� ���� ������� �������������
Component Video Connections
1 Using a Component video cable, connect the Y/
Pb/Pr outputs on the GFR-700HD to the corre-
sponding Y/Pb/Pr inputs on your digital display
device.
2 Be sure to match the red, green, and blue con-
nectors accordingly.
HDMI Connections
1 Using an HDMI cable, connect the HDMI output
on the GFR-700HD to the corresponding HDMI in-
put on your digital display device.
2 The built-in HDMI switcher/scaler allows you to
view both HDMI source components and upcon-
verted legacy sources (composite, S-video, and
Component video) on your digital display de-
vice.
On-Screen Display (OSD) Notes:
HDMI
Out
•
�� � ��
•
��������������������������
������ ���� ��������������������
������ ������ ������
�������� �������� �������� ������� ��������� ��������� ��������� ���������
�������������
��������������
VIDEO 1 DOLBY D
COAXIAL 1 -40.0 dB
The OSD is always available
��
on the Composite and S-video
outputs.
The OSD is always available on
the Component video out-
puts, EXCEPT when the input
signal is higher than standard
������
(NTSC/PAL) resolution. If so,
the GFR-700HD switches from
��������� ���������
standard to bypass mode and
the OSD will not appear. How-
����� �����
ever, you can still access the
Setup menus by pressing the
�������������������������
�����������
Setup button (which causes the
���������������������������
GFR-700HD to switch back to
standard mode).