Page 1
1) Sehen Sie Einführschrägen für die O-Ringe vor. Vermeiden Sie eine Gratbildung, indem Sie zuerst die Querbohrung und dann die Längsbohrung fertigen. +0,1 2) Bei D1 mit @11,1: Wählen Sie für einen Gewindeanschluss G1/4 Kern-@ 11,8 3) Mindestquerschnitt. Festo empfiehlt den größtmöglichen Querschnitt.
Page 2
1) Provide insert slopes for the O-rings. Avoid flash formation by making first the lateral hole and then the longitudinal hole. +0.1 2) On D1 with @11.1: Select core-@ 11.8 for a G1/4 thread connection. 3) Minimum cross-section. Festo recommends the largest cross section possible.
This manual is also suitable for:
Vn-05-hVn-05-lVn-07-hVn-07-lVn-10-hVn-10-l...
Show all