Kia K5 2021 Owner's Manual page 59

Safety features of your vehicle
First secure the child restraint with
the LATCH lower anchors or the
seat belt. If the child restraint man-
ufacturer recommends that the top
tether strap be attached, attach
and tighten the top tether strap to
the top tether strap anchor.
Child Restraint hook holders are
located on the package tray.
WARNING
Take the following precautions
when installing the tether strap:
Read and follow all installation
instructions provided with your
Child Restraint System.
NEVER attach more than one child
restraint to a single tether anchor.
This could cause the anchor or
attachment to come loose or
break.
Do not attach the tether strap to
anything other than the correct
tether anchor. It may not work
properly if attached to something
else.
Do not use the tether anchors for
adult seat belts or harnesses, or
for attaching other items or
equipment to the vehicle.
Always fasten the seat belts
behind the child restraint seat
when they are not used to secure
the child seat. Failure to do so
may result in child strangulation.
Child Restraint System (CRS)
To install the tether anchor:
ODL3A030038
1. Route the Child Restraint System
seat strap over the seatback.
For vehicles with adjustable head-
rest, route the tether strap under
the headrest and between the
headrest posts, otherwise route
the tether strap over the top of
the seatback.
2. Connect the top-tether to the
top-tether anchorage, then
tighten the top-tether according
to the instructions of your Child
Restraint System's manufacturer
to firmly attach the Child
Restraint System to the seat.
3. Check that the child restraint is
securely attached to the seat by
pushing and pulling the seat for-
ward and from side-to-side.
3
3 37