Maintenance; Service - Husqvarna PP 325 E Operator's Manual

Service

IMPORTANT! All types of repairs may only be carried out by
authorised repairmen. This is so that the operators are not
exposed to great risks.

Maintenance

IMPORTANT! Inspection and/or maintenance should be
carried out with the motor switched off and the plug
disconnected.
Cleaning
Make sure to keep the connectors and pins clean. Clean with
a rag or brush.
NB! Do not use a high pressure washer to clean the power
unit. Do not wash the machine with water, as water can enter
the electrical system or the engine and cause damage to the
machine or short circuit.
MAINTENANCE
Hydraulic oil
IMPORTANT! Changing liquids and filters must be done in
such a way that the machine's hydraulic system and the
surrounding environment are not damaged. Dispose of
residual products according to local laws.
The hydraulic oil should be replaced when needed or once a
year.
• Place a collecting vessel under the tank's drain plug and
open the plug.
• Screw on the drain plug when all the liquid has drained
out.
Hydraulic oil is refilled through the filter on the front of the
tank.
• Lay the power pack down with the filter housing facing
upwards.
• Remove the cover of the filter housing by removing the
three screws.
• Refill hydraulic oil through the filter element.
• Mount the filter housing cover.
• If also the oil filter is replaced, 12 l new hydraulic oil should
be filled.
– 11
English