Driver Installation; Driver Install - Horizon Fitness HD-STM User Manual

Driver installation

Before we can load new selections downloaded from the Horizon web site it is necessary to load the
drivers supplied on the CD Rom on to your computer. This procedure is explained step by step below.
Insert the supplied CD Rom into your computer now so that the driver installation can be complete easily.
Page 32
Connect your meter to you PC with the USB cable
supplied. Then press the On button and the screen
will power up with a USB connector symbol as
illustrated in the screen shot on the left.
The found new hardware wizard will appear on your
computer.
Please note: If there is no activity on the USB port for
2 minutes the meter will automatically power down.
You computer will detect that a device is connected
to your computer.
The hardware (USB CDC Serial Port) will be
detected.
The "Found New Hardware" wizard will appear,
select "Yes, this time only" and then click "Next >"
Select "Install the software automatically
[Reccomended]" option and click "Next >"
Continued...