Mast Head Power (Mhp); Terrestrial Scan Uhf / Vhf - Horizon Fitness HD-STM User Manual

Terrestrial Mast Head Power
Mast Head Power
Please select MHP voltage
0 Volts (Off)
5 Volts Active Antenna
12 Volts Mast Head Power
Press ▲ or ▼ for the required
voltage and press OK to select.
UHF Step Ch. 25
S
C
Q
V
DVB-T 506MHz **** Pass
Press ◄ or ► to select the
next UHF channel.
01/10/2010 10:30 AM
Scan UHF / VHF
Scan +Crystal Palace
Freq. 482MHz Ch 22 DVB
▼
21
User the ◄ or ► buttons to select a
carrier and press OK for more detail.
01/10/2010 10:30 AM
Note: If you are using the scan function whilst in Step Through mode only the RF power will be shown digital
services are only indicated when a specific transmitter has been selected.
Page 26
MHP
0V
Back
TERR
46 dBuV
Menu
22 dB
MHP
6.30E-3
12V
3.00E-8
Scan
More
TERR
Menu
Log
More
►
Back
By pressing the MHP button you can select the Mast Head
Power Voltage from the 3 options available below.
MHP MHP
0 Volts 5V
Use the cursor keys to select which Mast Head voltage is
required for your installation and press the OK button.
When mast head power is applied the MHP box will be
shown in inverse.
The UHF Scan function enables you to quickly see which
carriers are DVB-T (Digital) and which are Analogue for a
selected transmitter. You can move the marker with the
cursor keys and press the OK button to examine the carrier
in more detail in this example we are looking at the Crystal
Palace transmitter.
MHP
12V