Horizon Fitness HD-STM User Manual page 18

DiSEqC (Motor Control)
DiSEqC Motor
V Astra 2A Hi 28.2E
S
In Motion
Searching
Press and hold ◄ or ► to move
and OK to store.
01/10/2010 10:30 AM
DiSEqC Motor
V Astra 2A High Band 28.2E
S
Q
Stopped
Found
Press ◄ or ► cursor keys to move
the dish.
01/10/2010 10:30 AM
DiSEqC Motor
V Astra 2A High Band 28.2E
S
Returning motor to Zero
Searching
Press ◄ or ► to interrupt motion.
01/10/2010 10:30 AM
Note: The DiSEqC motor function will drain your battery faster than your meter in normal use. The return to
zero position (Zero Pos.) function can be interrupted at any time by pressing the right or left cursor key once.
Page 18
SAT
67 dBuV
Zero
Pos.
Back
SAT
67 dBuV
Zero
Pos.
2.02E-4
Back
SAT
67 dBuV
Zero
Pos.
Back
The DiSEqC motor control will enable you to check
the alignment of DiSEqC motorised systems. To
operate your DiSEqC motor ensure that your
connections to the motor are made first. Pressing
the right cursor key will move the antenna in one
direction and pressing the left cursor key will move
the antenna in the other direction. Releasing the
cursor key will stop the motor.
The "Zero Pos." option on the soft key will enable
you to return the DiSEqC motor to its Zero Position.
In the example screen shot on the left we can see the
V Astra 2A Hi 28.2E selection has acquired a lock
(Found). The DiSEqC motor can be jogged by tapping
the cursor keys to improve the signal levels.
Selecting SAT will return you user to the satellite
finding mode with the last satellite chosen selected.
Selecting BACK will also return you user to the satellite
finding mode with the last satellite chosen selected.