Table of Contents
Advertisement
3.5 RS485 Output for Modbus RTU
The meter provides a RS485 Modbus output for remote monitoring. The default is Autometers
V.6. For other protocols it can be configured via the display using the password.
Baud rate:
Parity:
Stop bit:
Modbus address:
3.6 Mechanics
DIN rail dimensions:
Mounting:
Sealing:
Material:
4. Dimensions
5. Maintenance
In normal use, little maintenance is needed. As appropriate for service conditions, isolate electrical
power, inspect the unit and remove any dust or other foreign material present. Periodically check
all connections for freedom from corrosion and screw tightness, particularly if vibration is present.
The front of the case should be wiped with a dry cloth only. Use minimal pressure, especially over
the viewing window area. If necessary wipe the rear case with a dry cloth. If a cleaning agent is
necessary, isopropyl alcohol is the only recommended agent and should be used sparingly. Water
should not be used. If the rear case exterior or terminals should be contaminated accidentally
with water, the unit must be returned to Autometers Systems Ltd for inspection and testing.
6. Installation
The meter is designed to be fitted on a DIN rail in a suitable enclosure. The unit is intended for use
in a reasonably stable ambient temperature within the range -25°C to +55°C. Do not fit the meter
where there is excessive vibration or in excessive direct sunlight.
Please note terminal covers should be fitted and sealed.
See connection diagrams page 16.
11
1200, 2400, 4800, 9600
none / odd / even
1 or 2
001 to 247
35x92x65 (WxHxD)
Per DIN 43880
DIN rail 35mmn
IP51 (indoor)
self-extinguishing UL94V-1
Important Safety Information is
contained in sections 5-6. Familiarize
yourself with this information before
procedures. Symbols used in this
Risk of Danger: These instructions
contain important safety information.
Read them before starting installation or
autometers.co.uk
WARNING
attempting installation or other
document:
servicing of the equipment.
Caution: Risk of Electric Shock
Advertisement
Table of Contents
