Operation Instructions - Oster OGJ41101 User Manual

OPERATION INSTRUCTIONS

SIGNALS DURING OVEN SETTINGS:
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
Suppose you want to set the clock as 8:30:
1. Touch CLOCK pad.
2. Use the number pads to enter the correct time until the screen shows 8:30.
3. Touch CLOCK pad again.
NOTE:
· This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the display
will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.
· You can check the clock time while cooking is in progress by touching the CLOCK pad.
SETTING THE TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the number pads. Digit time is in minutes and seconds and set left to right. Set
one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).
3. Touch START/STOP.
NOTES:
· The maximum time you can enter is 99 minutes and 99 seconds.
· Time countdown can be seen in display before clock or cooking time is returned to display.
· Touch TIMER and then touch RESET to cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking time. You can set a cooking time from 00:01 to 99:99.
2. The default setting is 100% microwave power output. If you want to set a power level other than 100%, touch POWER
LEVEL, and then use the number pads to enter the power level.
3. Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad Cooking power
9
8
7
6
5
Number pad
90% 4
80% 3
70% 2
60% 1
50% 0
Cooking power
40%
30%
20%
10%
0%
7