Operation Instructions - Oster OGZD0701 User Manual

OPERATION INSTRUCTIONS

When the oven is first plugged in, the display will briefly show "CLOCK","1:01".
During cook setting mode, the system will return to waiting mode if there is not any operation within 25seconds.
After a cooking program has finished, the oven will sound beeps with END showing on screen, press RESET
pad or open oven door to clear it before setting another function.
During cooking, if press START/STOP pad once, the program will be paused, then press START/STOP pad to
resume, but if press START/STOP pad once, and then press RESET pad, the program will be canceled.
SETTING THE CLOCK
This is a 12 or 24 hour clock, you can press and hold TIMER/CLOCK pad for 3 seconds to select 12 hour cycle or
press TIMER/CLOCK pad twice to select 24 hour cycle. To enter the digital clock time, press the TIMER/CLOCK pad
once and then press the number pads to set the time of day.
For example: to set the time of 6: 35.
1. Press and hold TIMER/CLOCK pad for three seconds,"Hr12" will display, press TIMER/CLOCK again,"24Hr" will
display.
2 . Touch number pad to enter clock time.
3. Press TIMER/CLOCK pad again to confirm.
SETTING THE TIMER
The longest time is 99 min. 99 sec.
Suppose you want to set 30 minutes timer.
1. In standby mode, press TIMER/CLOCK pad once
2. Press the number pads to enter "30：00".
3. Press START/STOP to confirm.
NOTE:
•
You can check the timer time by pressing TIMER/CLOCK pad once, and you can cancel this function by pressing
RESET pad within 5 seconds.
SETTING A COOKING PROGRAM
To cook with microwave, time and power level should be set. The longest cooking time is 99 min. 99 sec.
By pressing the POWER pad a number of times, you are selecting one of the following microwave power levels:
8