Hand Guard; Front Handle; Power Trigger - Husqvarna 136LiHD50 Workshop Manual

5.5 Hand guard

5.5.1 To disassemble the hand guard
1. Disassemble the wear guard, the front handle and
the right chassis half.
2. Remove the hand guard from the chassis.
5.5.2 To assemble the hand guard
1. Make sure the hand guard fits into the related
grooves in the chassis.
2. Assemble the right chassis half and the front handle.

5.6 Front handle

5.6.1 To disassemble the front handle
1. Disassemble the wear guard.
2. Remove the 2 screws that hold the handle.
12 - Repair instructions 136 LiHD50
3. Remove the connector for the handle out of the
chassis and disconnect it. Remove the handle from
the product.
5.6.2 To assemble the front handle
Assemble in the opposite sequence of
the front handle on page 12 .

5.7 Power trigger

5.7.1 To disassemble the power trigger
1. Disassemble the wear guard, the front handle and
the right chassis half.
2. Remove the power trigger (A), the catch (B) and the
spring (C).
B
A
To disassemble
C
456 - 002 - 03.10.2018