Important Notice - BRP SEA-DOO GTX LTD iS 255 Predelivery Bulletin

IMPORTANT NOTICE

IMPORTANT NOTICE
This bulletin must be used in conjunction with the
pack.
To obtain limited warranty coverage, predelivery procedures must be performed by an autho-
rized Sea-Doo watercraft dealer/distributor. Apply all necessary torques as indicated.
— The information and components/system descriptions contained in this document are correct at the
time of publication. However, BRP maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on products previously manufactured.
— Due to late changes, there might be some differences between the manufactured product and the
descriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
— The illustrations in this document show the typical construction of the different assemblies and may
not reproduce the full detail or exact shape of the parts; however, they represent parts that have the
same or similar function.
— The content of this bulletin is designed as a guideline only. All mechanics performing predelivery pro-
cedures should have attended the current model year service training.
— Further information or inquiries should be directed to your distributor service representative and/or
SHOP MANUAL
specific
— Please complete the
copy.
— Make sure the purchaser receives the
and SAFETY DVD .
Torque wrench tightening specifications must be strictly adhered to. Where specified, install new
locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a locking device is impaired,
it must be renewed.
2 / 23
sections.
PREDELIVERY CHECK LIST
OPERATORS GUIDE
PREDELIVERY CHECK LIST
WARNING
for each watercraft and retain a purchaser signed
PREDELIVERY CHECK LIST
,
WARNING
2009-3
enclosed in the shrink
signed copy
PREDELIVERY