Steering Cable - BRP SEA-DOO GTX LTD iS 255 Predelivery Bulletin

sbl2009-004-114_a
1. Steering column screw
2. Steering washer
23. Install gauge support by pushing it down-
wards. Make sure to engage front and rear
locking tabs.
sbl2009-004-117
24. From inside storage compartment, connect
steering connectors to vehicle harness.
sbl2009-004-115_a
1. Steering connectors
25. Connect gauge connector.
PREDELIVERY
sbl2009-004-116_a
1. Gauge connector
26. Install gauge support cover.
26.1 Soften the bottom portion of cover using
an incandescent or halogen light.
26.2 First, insert the top of the cover.
26.3 Press both lower sides of cover to lock
tabs.
sbl2009-004-118

Steering Cable

International Models
1. Verify if steering cable is properly installed into
its support.
2. Perform steering alignment procedure, de-
scribed further in this bulletin, prior to torquing
screws from steering cable supports.
2009-3
PARTS TO BE INSTALLED
11 / 23