B.u.d.s. Programming; Connecting A Pc To Vehicle - BRP SEA-DOO GTX LTD iS 255 Predelivery Bulletin

smo2009-002-137_a
TYPICAL - COOLANT EXPANSION TANK
1. Level between marks when engine is cold
6. Adjust coolant level between marks as re-
quired. Use a funnel to avoid spillage. Do not
overfill.
7. Properly reinstall and tighten filler cap, then re-
install ventilation box and close seat.

B.U.D.S. PROGRAMMING

Connecting a PC to Vehicle

WARNING
If the computer you are using is connected to
the power outlet, there is a potential risk of
electrocution when working in contact with
water. Be careful not to touch water while
working with the computer.
Open the boarding platform.
ssi2009-002-002_a
1. Boarding platform
Remove the RH (starboard) storage bin.
PREDELIVERY
ssi2009-002-003_a
1. RH (starboard) storage bin
Disconnect the 6-pin diagnostic connector.
ssi2009-002-004_a
1. Diagnostic connector
Connect
MPI-2 DIAGNOSTIC CABLE (P/N 710 000
to vehicle connector.
851)
smr2009-028-004_a
1. Diagnostic cable
Connect MPI-2 cable remaining connector to
MPI-2 INTERFACE CARD (P/N 529 036 018)
2009-3
B.U.D.S. PROGRAMMING
.
15 / 23