Wiring Diagram, Cabling - 120 V - Husqvarna K 3000-Electric Workshop Manual

BLACK
BLACK
BLACK
WHITE
Earth fault breaker
1
3
WIRING DIAGRAM, CABLING – 120 V
GREY
BLACK
WHITE
BLACK
GREEN/YELLOW
2
c
h
g
f
Stator
GREY
Rotor
Stator
a
b
e
d
4
5
Assembly diagram
The assembly diagram shows the colours
and positions of the connection cables
for the electrical connections.
Components/cables
Illustration 1. Removal
Remove the cover to the carbon brushes,
see "carbon brushes" chapter, page 6.
Remove the screws as shown in the
illustration.
The illustration below shows the position
of the components and cables in the
handle.
Illustration 2
a. Incoming from mains current.
b. From switch to circuit board.
c. Screw for earth connection and earth
connector.
d. From circuit board to stator winding.
e. From circuit board to right connec-
tion for the carbon brush, see illustration
3 position f.
Illustration 3
The illustration shows the position and
attachment of the cables in the handle.
f. Connection of black cable from circuit
board.
g. and h. From mains cable to switch,
white and black.
Illustration 4
Turn the switch's cable lug as per illustra-
tion.
Illustration 5
Both the stator's ring cable lugs are
connected to the left carbon brush. See
illustration on page 15.
7
9