Placing The Gfr-700; About The Remote Control - Adcom GFR-700 User Manual

Placing the GFR-700

Place the GFR-700 on a stable, vibration-free surface
away from moisture and out of direct sunlight. Your
Adcom dealer will be pleased to show you many dif-
ferent types of audio/video equipment racks and
cabinets.
The GFR-700's rear panel is the central connecting
point for almost every component in your audio/
video system. Be sure to leave sufficient room be-
hind the rear panel to accommodate cables, antenna
leads, power cords, etc. We recommend a minimum
of 5 inches of free space for maximum flexibility.
A distance of 1/2" should be maintained around the
GFR-700 for ventilation. Keep your GFR-700 in a room
where temperatures remain fairly moderate, and
never cover it with table cloths, curtains, newspa-
pers, etc., to avoid potential overheating.
6 GFR-700 Owner's Manual

About the Remote Control

The GFR-700 comes with a universal, programmable,
backlit, ergonomic remote control that is ready for
action in every sense of the word.
• For an overview of each remote button, see page
8.
• To program the remote, see page 42.
Inserting the Remote Batteries
1 Remove the cover on the back panel of the re-
mote control.
2 Insert four AAA alkaline batteries, paying atten-
tion to the correct polarities.
3 Replace the cover.