Basic Audio/Video Playback
Follow these steps to play an audio/video source
component connected to the Video 1, Video 2, Video
3, Video 4, or CD inputs.
Playing an AV Source Component
1
Before you begin:
•
Power on the GFR-700.
•
Power on your Source component.
•
Power on your TV or display device (If ap-
plicable).
2
Select your input source.
•
Press the desired Source selector button
(Video 1, Video 2, Video 3, Video 4, or CD)
on the GFR-700.
3
Play your Source component.
•
If you programmed the GFR-700 remote con-
trol, press the Play button to initiate play-
back on your Source component.
•
The output signal from your Source compo-
nent will be heard through your speaker sys-
tem and/or seen on your display device.
4
Adjust the volume.
•
Turn the Volume knob to adjust the volume
from -80dB to 18dB.
Special Playback Features
During playback, choose from these special playback
features:
•
Mute - Press the Mute button to temporarily
mute the audio.
•
Dynamic Range - Press the D. Range button to
compress the dynamic range of your audio out-
put (aka, "night mode").
Theater EQ - Press the TH-EQ button to enable
•
Theater EQ sound.
Surround modes - Press the Mode button to over-
•
ride the default Surround mode and choose one
of the many built-in options to suit your source
material; see page 53.
•
Sync - Press the Sync button and use the /
buttons to delay the audio if the sound is out of
sync with the picture.
52
GFR-700 Owner's Manual
External 7.1 Playback
If your source component is connected to the Ext 7.1
jacks, simply press the Ext 7.1 button on the remote
control or front panel.
•
To connect a source component to the Ext 7.1
inputs (usually DVD, DVD-Audio, or SACD player),
see page 20.
Tape Playback
If your source component is connected to the Tape
input, press the Tape button on the remote control
or front panel.
•
To connect a source component to the Tape in-
puts, see page 21.
Source
buttons
Ext7.1/
Tape
Play
Mute
Volume
Mode
TH-EQ
Sync
D. Range
Need help?
Do you have a question about the GFR-700 and is the answer not in the manual?
Questions and answers