Table of Contents
Advertisement
Available languages
Available languages
Digital laser measure
Measuring accuracy (typical)
Smallest display unit
Operating temperature
Storage temperature
Relative air humidity max.
Max. altitude
Pollution degree according IEC 61010-1
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 20 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without measurement)
Weight according to EPTA-Procedure 01:2014
Dimensions
Batteries
Battery life approx.
– Individual measurements
– Continuous measurement
A) For measurements from the rear edge of the measuring tool. The working range increases de-
pending on how well the laser light is reflected from the surface of the target (scattered, not re-
flective) and the brighter the laser point is to the ambient light intensity (interior spaces, twi-
light). For distances of less than 20 m, a retro-reflective target plate should not be used, as it
can lead to measurement errors.
B) For measurements from the rear edge of the measuring tool, 100% reflectivity of the target (e.g.
a white wall), weak backlighting and 25 °C operating temperature. In addition, a deviation influ-
ence of ±0.05 mm/m needs to be taken into account.
C) non-conductive soiling only, whereby occasional temporary conductivity caused by condensa-
tion is expected
D) At an operating temperature of 25 °C
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Bosch Power Tools
English | 21
UniversalDistance 50
B)
±2.0 mm
1 mm
–10 °C to +40 °C
–20 °C to +70 °C
90%
2000 m
C)
2
2
635 nm, < 1 mW
9 mm
18 mm
20 s
5 min
0.08 kg
100 x 42 x 22 mm
2 x 1.5 V LR03 (AAA)
D)
10,000
D)
2.5 h
1 609 92A 4PE | (25.10.2018)
Advertisement
Table of Contents
