Activate And Sign In To Your Phone - Cisco 7832 Manual

Your Phone
You need a new phone that hasn't been connected to the network or previously configured.
Procedure
Step 1 Power off the old phone.
Step 2
Power on the new phone.
Step 3 If prompted, enter your activation code.
Step 4
Select Replace an existing phone.
Step 5 Enter the primary extension of the old phone.
Step 6
If the old phone had a PIN assigned, enter the PIN.
Step 7 Press Submit.
Step 8
If you have several devices, select the device to replace from the list and press Continue.

Activate and Sign In to Your Phone

You may need to activate or sign in to your phone. Activation happens once for your phone, and connects the
phone to the call control system. Your administrator gives you your sign-in and activation credentials.
Sign In to Your Phone
Before you begin
Get your user ID and PIN or password from your administrator.
Procedure
Step 1
Enter your user ID in the User ID field.
Step 2 Enter your PIN or password in the PIN or Password field, then press Submit.
Sign In to Your Extension from Another Phone
You can use Cisco Extension Mobility to sign in to a different phone in your network and have it act the same
as your phone. After you sign in, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your administrator sets you up for the Cisco Extension Mobility
service.
Before you begin
Get your user ID and PIN from your administrator.
Activate and Sign In to Your Phone
Your Phone
7