Figure 5-41 Self-Node Cpu Or Lpu Memory Allocation Window - Hitachi S10mini User Manual

5 USER GUIDE
(1) Allocating the self-node CPU or LPU memory
With the setup tool named [FL.NET For Windows®], open the [self-node information]
window. In the "PCs allocment" section, enter the addresses for the PI/O or extension
memory to be allocated as the self-node CPU or LPU memory area. After completion of
input, click the

Figure 5-41 Self-node CPU or LPU Memory Allocation Window

Input item
Area 1 address
(PCs allocation)
Area 2 address
(PCs allocation)
OK button. The entered settings are then saved in the FL.NET module.
Description
Set the starting address for the allocation
of area 1 common memory and CPU or
LPU memory.
Set the starting address for the allocation
of area 2 common memory and CPU or
LPU memory.
Self-node CPU or LPU
memory allocation address
Acceptable selection range
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory. "
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory. "
5-44
Enter the area 1
starting PI/O
address.
Enter the area 2
starting PI/O
address.