Printing - Hitachi S10mini User Manual

5 USER GUIDE

5.6.12 Printing

Function: The function of commands used for this purpose is to print on the printer one of the
following two pieces of information: 1) the setup information for a selected module from
the actual target machine if the FL.NET system is running in online mode; or 2) the
content (setup information) of a selected file if it is running in offline mode. This
function is supported only in S10V controller systems.
Operation: The procedure used is shown below.
(1) If the FL.NET system is running in online mode, establish a connection between the FL.NET
system and the PCs (see "5.5.4 Changing connections"). If it is running in offline mode,
choose the desired file for editing (see "5.5.5 Selecting an edition file").
(2) Choose [Main] – [Setup], or [Sub] – [Setup], from the [Module] menu. Then, the [Setup self-
node] icon (red) and [Other-node setup transmission] icon (blue) appear.
(3) Choose [Main] – [Print], or [Sub] – [Print], from the [Module] menu.
(4) The [Print] dialog box appears. In this dialog box, specify the desired printer and its
properties, and then click the OK
Figure 5-60 The [Print] Dialog Box -- an Example
button.
5-150