Functionality And Performance Specifications; Support Tool Specification; Table 2-2 Functionality And Performance Specifications - Hitachi S10mini User Manual

2.1.1 Functionality and performance specifications

Table 2-2 Functionality and Performance Specifications

Item
Model
Maximum number of mountable
modules
Transfer speed
Electrical interface
Transmission protocol
Number of connectable units
Connector
External AUI supply power
(terminal block)
Module outside dimensions
Weight
Transfer word count
Transfer distance
Cable length

2.1.2 Support tool specification

For the use of the FL.NET module, you must set the node numbers, common memory, and various
other items with the setup tool named "FL.NET For Windows®."
For the detailed specifications for the setup tool, see "5.5 Installing and Starting up the System"
and "5.6 Operating Method."
Specifications
LQE500, LQE502
S10mini: 2 modules per CPU (Installing from the
leftmost slot is required.)
S10V: 2 modules per LPU (Installing from the
leftmost slot is not required.)
10 Mbps
IEEE 802.3-compliant (CSMA/CD-compliant)
UDP/IP, FA link protocol
Up to 254 units per network
AUI connector (10BASE5)
RJ45 connector (10BASE-T)
12 VDC, 500 mA or less (M3 screw terminal block)
34 (W) × 130 (H) × 100.2 (D) mm
240 g
Cyclic: 8.5k words maximum (node)
Message: 1024 bytes maximum (node)
10BASE5: 2.5 km maximum (inter-node)
10BASE-T: 1.5 km maximum (inter-node)
Transceiver cable: 50 m maximum (10BASE5)
Twisted-pair cable: 100 m maximum (10BASE-T)
2-3
2 FL.NET MODULE
Remarks
Required for 10BASE5
use only