Installation And Connections; Installation - TAD -D1DDOMK2 Owner's Manual

instaLLation anD connections

installation

WARNINg
' Install the unit in a flat, level and stable location that provides fully sufficient strength to support the unit's weight, since
damage or personal injury may occur if the unit falls from its installation. When installing on a bookshelf or similar
structure, be sure to confirm first that the shelf structure has sufficient strength.
' Never set other items on top of the unit, or cover the unit with cloths or sheets, since heat dispersion may be impaired,
leading to unnatural heat buildup and potential damage.
CAUTION
' When installing the unit, allow a minimum 10 cm clearance from adjacent walls or barriers. In order to facilitate heat
dispersion, the unit should be installed at some distance from other electric components. When installing the unit
on a rack, a minimum of 10 cm clearance should be provided above, behind, and to the sides of the unit. Leaving
insufficient ventilation space around the unit may lead to excessive heat buildup and the potential for fire.
' Never install the unit on a rug, cushion or other soft surface, or in a narrow location that may interfere with natural air
flow around the unit.
' A round spike structure is adopted in the inside of the insulator of this unit. To maximize the functionality of the
insulator, the protrusion in the center of the bottom of the insulator is not completely fixed for allowing slight
movement. The unfixed state is normal and not a product defect.
14