Charging The Battery; Cable Connection Instructions - dji ROBOMASTER S1 Quick Start Manual

Preparation
Wear the safety goggles to avoid injuring your
eyes while assembling the components.
1. Preparing the Gel Beads

2. Charging the Battery

Charge the battery to bring it out of hibernation
before using for the first time.
Charging Time: Approx. 1 hour and 30 min
6
Refer to the label on the bottle for
more information on how to soak
the gel beads properly before
assembly.
3. Preparing the Screwdriver
The package includes a screwdriver handle and a
double-head bit. The smaller end of the bit is for the T2
screws, and the bigger end is for the other screws.
4. Legend
(M3-A)

5. Cable Connection Instructions

100-240 V
Connect the black and orange cables to the ports with
50-60 Hz
the corresponding color.
Refers to the accessories required
including such information as the screw
×6
model and quantity. For example, the
description in this illustration indicates
that six screws of the M3-A model are
required.
Indicates that the bottom of the robot is
displayed.
Refers to where the required accessories
are located in the screw box.
Follow the instructions for cable connection and wiring to
avoid cable damage.