6.4.3
Mounting the stator with cooling jacket
6.4.3.1
Production equipment, assembly tools and other resources
To install the cooling jacket, you require the following production equipment, mounting tools
and other equipment.
Personal protection equipment
Personal protection equipment:
● Face protection shield
● Protective gloves
● Closed protective clothing for protection against high surface temperatures
Mounting, production and auxiliary equipment for installation
1
2
3
4
5
6
Not
show
n
Medium for the leak test with liquid
Water connection, maximum test pressure 0.7 MPa (7 bar).
SIMOTICS M-1FE2 built-in motors
Hardware Installation Manual, 04/2020, A5E50074509B AA
Appropriate axial stops (examples)
Load suspension equipment (example)
Eyebolts
Spacing sleeves
Plastic-covered support arm for horizontal mounting (example)
Internal tensioning spindle (example)
Anti-corrosion agent for steel surfaces
Grease or talcum as lubricants for Viton O-ring seals
6.4 Installing the stator in the spindle housing
Mechanical mounting
119