Changing The Light Bulbs - Whirlpool ET25DQ Use And Care Manual

Electrical Shock Hazard
Before removing
a
light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the refrigerator
at the main power supply.
Failure to do so could result in electri-
cal shock or personal injury.
Changing the light bulbs
I
To change the refrigerator light:
1.
Disconnect refrigerator from power
supply-
2. Reach behind the Control Panel to
remove bulb.
3. Replace with a go-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change freezer light:
1. Disconnect refrigerator from power
supply.
2. Grasp top and bottom of light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25-watt appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE:
Not all commercial appliance bulbs
will fii your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
a
cfb 0
=y zr
0
0 .
0
0
w
19