Bang & Olufsen BeoCenter 2 Manual page 7

Aerial connections – AM/FM/DAB
We recommend that you connect your DAB aerial
before connecting your other aerials. DAB radio
programs are only available if your music system is
equipped with the built-in DAB module.
Connect your DAB aerial to the socket marked
DAB, your FM aerial to the socket marked FM, and
your AM aerial to the socket marked AM.
When using an AM loop aerial or FM dipol
aerial ...
Tune in to the radio station you want, then turn
the aerial horisontally until you receive the best
possible signal.
When using a DAB aerial ...
Use the DAB AERIAL ADJUSTMENT menu, described
on page 10 in the BeoCenter 2 Guide, to find out
where to place your aerial. The menu lets you
know how strong the DAB signal is.
Make sure that you hang or mount the aerial
vertically.
Do not mount your BeoCenter 2 or the Socket unit
permanently – for example, in a wall bracket – until
you have found out where the signal is strongest
and placed your system accordingly!
Loudspeaker connections – Power Link
Connect your active speakers to the socket
marked Power Link and loop the signal through
from speaker to speaker. Refer to the Guides for
the BeoLab Loudspeakers.
When headphones are plugged in, the speakers,
connected to your music system, are muted.
Prolonged listening at a high volume level may
cause hearing damages!
Audio/Video connections – AV
This connection is only available if your BeoCenter 2
is equipped with DVD.
Use a 21-pin AV cable to connect the sockets
marked AV on the Socket unit and the television.
For connection without a 21-pin AV cable, refer to
the next column.
DIG.OUT
If you connect your music system to a Bang &
Olufsen television with a built-in surround sound
module, you must connect the socket marked
DIG.OUT to the digital input socket on your tele-
vision or speakers. If the required cable is not
enclosed, it is available from your Bang & Olufsen
retailer.
Mains connection
Plug the mains cord into the socket marked ~ on
the socket unit, but do not connect it to the mains
before you have finished all connections.
Audio/Video connection without a
21-pin AV cable ...
If your television is not equipped with an 21-
pin AV socket, you can still connect it to the
music system. This applies only if your BeoCenter 2
is equipped with DVD!
> Connect the CTRL socket on the Socket unit to
the CTRL socket on your television.
> Connect the S-VIDEO socket on the Socket unit
to the S-VIDEO socket on your television.
> Connect the VIDEO socket on the Socket unit to
the VIDEO socket on your television.
> Connect the DIG.OUT socket on the socket unit
to the digital input on your television.
> Connect the LINE OUT R and L socket for right
and left channel audio output on the socket unit
to the R and L sockets on your television.
Connect auxiliary equipment ...
AUX IN R – L
For connection of auxiliary equipment, such as a
record player.
AUX OUT R – L
For connection of auxiliary equipment, such as a
mini disc or a recorder.
7