Taws Class A; Eros Oxygen Mask; Placing System Into Configuration Mode - Garmin G3000 Instructions Manual

• TAWS Class A

o From the Home screen of either GTC 570, select the TAWS button. Then select
TAWS Selection button. If there are 6 buttons displayed on the page, then TAWS
A is loaded, and mark YES. Otherwise TAWS B is loaded as default. Note: First
image is TAWS B, and second image is TAWS A.
YES
NO

• EROS Oxygen Mask

o Look at the crew mask and determine if EROS brand. If the mask is an EROS, mark
YES. Note: The option changes the gains for the microphone if EROS is installed.
YES
NO

Placing System Into Configuration Mode

Note: Anytime that software or configurations are being loaded, all three displays, and both
touch controllers must be in configuration mode.
• When GCU 1 is replaced, then software and configuration loading is required.
1) Pull the following circuit breakers:
 L PFD
 MFD
 R PFD
 L Touch Control
 R Touch Control
2) Insert the 010-01293-10 software loader card into the upper slot of PFD 1.
3) Turn on aircraft power.
Version 1.0
REFERENCE ONLY
REFERENCE ONLY
8