Troubleshooting; Fail Message During Software & Configuration Loading; If A Fail Message Occurs - Garmin G3000 Instructions Manual

Section 5

Troubleshooting

This section will provide corrective actions for issues seen after the software is loaded.
• Fail Message During Software & Configuration Loading
o If a fail message occurs:
 Acknowledge the pop-up window by pressing the Enter key.
 Press the Enter key to uncheck the box where the FAIL occurred.
 Select LOAD at the bottom of the display.
o After everything else is loaded successfully, reload the item that failed previously.
 If that fails again, troubleshoot the issue.
Substitute LRU name for ***.
• *** DB Error or *** DB Mismatch
o Ensure that the supplemental SD cards are installed in the lower slots of the
displays.
o Databases do not match.
o Verify which database is not the same, and reload as necessary.
• *** Manifest Error
o Software does not match what the system is expecting.
o Check work performed and reload necessary software again.
• *** Config
o Configurations do not match what the system is expecting.
o Check work performed and reload necessary configurations again.
Version 1.0
REFERENCE ONLY
• Reloading the software and configuration for that component will
sometimes correct the issue.
REFERENCE ONLY
17