Table of Contents
Advertisement
1.800.561.8187
MAINTENANCE
Storage
1.
Rinse the electrode in distilled or deionized water.
2.
Store the electrode dry with the cap on.
3.
Always rinse the electrode in deionized water between measurements to
avoid cross contamination. Double rinsing is recommended when high
accuracy is required.
Battery Replacement
1.
Twist off the battery compartment cap.
2.
Hold the battery housing in place with one fi nger. Remove the battery
carrier by pulling on the small tabs.
3.
Replace the four CR2032 batteries. Observe polarity.
4.
Replace the battery compartment cap.
You, as the end user, are legally bound (EU Battery ordinance)
to return all used batteries, disposal in the household garbage is
prohibited! You can hand over your used batteries / accumulators
at collection points in your community or wherever batteries /
accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle.
Electrode Care
1.
Always rinse the electrode in distilled or deionized water between
measurements to avoid cross-contamination of the samples. Double
rinsing is recommended when high accuracy is required.
2.
Do not touch the electrodes. Touching the surface of the platinized
electrodes may damage and reduce the life of the electrodes.
16
www.
information@itm.com
.com
Hide quick links:
Advertisement
Table of Contents
