Webdyn WebdynSunPM User Manual page 54

S64
F32
F64
BF1
BF2
BF4
For some slaves, it may be necessary to invert bytes or registers for an accurate value
interpretation. Use the "Swap" dropdown for this.
Complete the variable configuration by setting the remaining fields such as scale and
variable unit.
2) Analog 0-10V and 4-20mA
To configure a device with analog input (0-10V or 4-20mA), create a new device and select either
"Analog generic device 0-10V" or "Analog generic device 4-20mA" from the "Model" dropdown list.
Next, select the device input port (1, 2, 3 or 4).
WebdynSunPM – User guide — Version 1.0
Integer 64 bits
Float 32 bits
Float 64 bits
Bit field 1 bit
Bit field 2 bits
Bit field 4 bits
USER GUIDE – WebdynSunPM
Yes
Yes
Yes
No
No
No
55