Webdyn WebdynSunPM User Manual page 42

USER GUIDE – WebdynSunPM
The WebdynSunPM concentrator accepts up to two information systems. Each IS can have its own
communication protocol.
To configure an IS, activate it and provide a name to identify it.
Next, define the protocol that will be used to access the IS (Ethernet or Modem).
Define the type of server (FTP, SFTP, MQTT, MQTTS, etc.) and the connection mode.
The connection mode, as well as the server settings, vary depending on the server type selected.
For more details on server-specific configurations, please refer to Appendix A.
Connection times to each server are configured via "Schedules" at the bottom of the same page.
43
WebdynSunPM – User guide — Version 1.0