Miele 07485101 Installation Instructions Manual page 3

M.-Nr. 07485101
A
Sicherheitsprüfung durchführen.
A
Maschine mit dem Stromnetz und gegebenfalls mit dem Gasnetz verbinden.
A
Multifunktionsmodul 7 anmelden.
A
Durchflussmessung des entsprechenden Durchflussmengenmessers (hier z. B. Nummer 1) für die Steuerung im
Servicemodus aktivieren, siehe Typ-TSD.
A
Funktionsprüfung mit dem Start eines Waschprogramms, bei dem Wasser über den Durchflussmengenmesser in die
Maschine einläuft, durchführen.
de
en
Flow meter installation instructions
Reason: The flow meter is used to measure the water coming into the machine.
Included parts
No. Mat. no. Designation
1 Flow meter
1 Water intake adapter
2 Seal, 3/4" 16 x 23.8 x 1.5
1 White sticker, 99 x 1 x 38.1
1 Various cable holders, 98 x 2.5
1 M12 x 1.5 cord connector
1 Reducing coupler, 1" inner diameter x 3/4" inner diameter, brass
1 Pipe nipple, 3/4" outer diameter
1 Adapter, 1" outer diameter x 3/4" inner diameter, brass
1 Wiring diagram, multifunction module 7 (flow meter)
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety regulations must be taken into account.
A
First read the Technical Service Documentation (TSD), then commence work.
Risk of injury due to sharp edges
CAUTION
There may be a risk of injury due to sharp edges.
Risk of injury due to sharp edges!
A
Protective gloves should be worn and the edge protection, Mat. no. 05057680, should be used.
Flow meter installation
The flow meter can only be installed if multifunction module 7 (flow meter) has already been installed in the machine.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
3 von 22
07.06.2018