Error Messages - Hitachi S10 Series Manual

8

Error Messages

Error messages are displayed on the Display screen as follows: "No. : Device Name: Error Message(Error
Occurrence Area)". Each description is shown below.
Item
No.
Device Name
Error Message
Error Occurrence Area
Display Examples of Error Messages
"RHAA035: PLC1: Error has been responded for device write command (Error Code: 2 [02H])"
• Refer to your External Device manual for details on received error codes.
• Refer to "Display-related errors" in "Maintenance/Troubleshooting Guide" for details on the
GP-Pro EX Device/PLC Connection Manual
Error No.
Name of the External Device where an error occurs. Device name is a title of the External
Device set with GP-Pro EX. (Initial value [PLC1])
Displays messages related to the error that has occurred.
Displays IP address or device address of the External Device where an error occurs, or
error codes received from the External Device.
• IP address is displayed such as "IP address (Decimal): MAC address (Hex)".
• Device address is displayed as "Address: Device address".
• Received error codes are displayed such as "Decimal [Hex]".
error messages common to the driver.
Description
53
S10 Series SIO Driver