Table of Contents
Advertisement
RADIUS Type
Select "Internal" to use the AP built-in RADIUS server or
"external" to use an external RADIUS server.
RADIUS Server Enter the RADIUS server host IP address.
Authentication
Set the UDP port used in the authentication protocol of the
Port
RADIUS server. (Value must be between 1 – 65535)
Shared Secret
Enter a shared secret/password between 1 – 99 characters in
length.
Session
Set a duration of session timeout in seconds between 0 –
Timeout
86400.
Accounting
Enable or disable RADIUS accounting.
Accounting
When accounting is enabled (above), set the UDP port used
Port
in the accounting protocol of the RADIUS server. (Value must
be between 1 – 65535)
50
Advertisement
Table of Contents
